worsas wrote: ↑Wed Jun 20, 2018 12:13 pm
Sounds good.
The horizontal dimensions for a single house shell usually vary between 2x5 and 3x5.
Thanks for clarifying.
Kaiel wrote: ↑Wed Jun 20, 2018 12:54 pm
This building should be 3x5 on the main part, and then a 3*3 square on the circle but with angled walls to make it into an octagonal room. I suggest matching the center interior floor piece with the corresponding piece of the main room where the door between the two will be and then letting the outside be cut off weirdly, it will save you lots of trouble with the door frame later. Are you on the discord?
Firstly; sorry for taking a bit to get back to you; I only just checked the thread.
I think I might have accidently caused some confusion; when I said that the tower section would be a 'bit larger than just a 2x2 block', I just wanted to give a rough idea of what the size would likely be, minus the walled off sections that wouldn't be part of the interior proper - I was always going to use a 3x3 block, and then employ walls angled such as to make the section resemble the shape of the tower. I probably should have just said that it was 3x3 in size outright and mentioned how parts would be cut off due to the angled walls, as it's a bit clearer with respect to my intent.
So to restate things; the main section is 2x5, and the tower section is comprised of a 3x3 block, minus the space cut off by the angled walls.
As for the size of the main section; I'm going to keep the width the same, but that can change if I see there's a need for it.
Thanks for your suggestion regarding the doorframe, but I've already handled joining the two sections up.
Yeah, I'm on discord, though I don't think I have a 'PT modder' tag, so that's why you probably missed me (I'll shoot you a message so you can find me.
Update Overview
Basic shell and layout of the interior is complete, the cell's name is 'PC_i2-Anv57'; I'll get started on detailing for the next update.
I know I said I was going to put seven rooms in the main section, but I had to revise the layout due to being unable to put one of the windows in the earlier layout (I intially did a basic layout of the whole interior just so I could get a clear idea of how I was tackling it prior to claiming), so now there's only six; to make up for this, I've decided to place two rooms in both the 3rd and 2nd floor of the tower section, though I'll have to wait until I start detailing it to see if it's wholly workable (it's a bit of a squeeze).
"SLOAD. SOAP. IS. NOT. SOAP"- TF
"As to where the ash comes from.. f**k if I care." -Sload
"At TR, we LOVE our quests to be steeped in lore, so you'd be able to flex your CHIM there just fine." - Nanu