AlexanderSig interior showcase

Interested in joining? Show off your skills here
Post Reply
AlexanderSig
PT Modder
Posts: 4
Joined: Fri Apr 29, 2022 6:44 pm

AlexanderSig interior showcase

Post by AlexanderSig »

Done in collaboration with AudunnSig. Designed to match this claim viewtopic.php?t=2166

Image
Attachments
Ironrye_Farmhouse.ESP
(8.94 KiB) Downloaded 7 times

User avatar
worsas
Project Administrator
Posts: 2575
Joined: Wed Dec 31, 2014 1:23 am

Post by worsas »

Hi there. I've notified the folks on discord about your showcase. Hopefully one will have time to look at your file soon.

User avatar
Jackimoff Wackimoff
PT Modder
Posts: 13
Joined: Wed Feb 10, 2021 1:00 pm

Post by Jackimoff Wackimoff »

Reviewing.

User avatar
Jackimoff Wackimoff
PT Modder
Posts: 13
Joined: Wed Feb 10, 2021 1:00 pm

Post by Jackimoff Wackimoff »

Name: Ironrye Farmhouse 1, please add PC_i3-35 to the beginning of the cell name for standardisation

Clean: Yes, good

Lighting: Fog and sunlight greyscale, make sure none of your setting has all three values the exact same. Change sunlight and Fog to somthing like 20,10,10. Light_Com_Candle_01 is causing greenlight, swap for Light_Com_Candle_01_64

Northmarker: Present, not correctly rotated. Correct rotation is not necessary for showcases but it is important for actual claims. Not something that needs fixing for the showcase though.

Fits exterior: Yes, good

Pathgrid: A few unnecessary nodes. I would give an example but it looks like the image upload isn't working. I can post on discord if you're on there.

Illegal to Sleep Here: Yes, good

Gridsnap: N/A


Bleeders & Floaters:
Nearly every asset. It looks like they were all manually placed onto the surfaces. Please use the F key to drop them down correctly. This will need to be done before I can do a full review.

Rescaled miscs:

Other:

I couldn't find an account with this name on the discord, if you haven't joined please do so. It makes it much easier to give fast feedback.

AlexanderSig
PT Modder
Posts: 4
Joined: Fri Apr 29, 2022 6:44 pm

Post by AlexanderSig »

Thanks! Didn't know of the F key for placement, good to know. I believe it should be fixed now, the table is very uneven so it's hard to avoid floaters/bleeders completely on it.

Edit May 9th: Fixed T_Com_ClothGreen_01 floating and misc_com_iron_ladle clipping with pot. Re-uploaded.
Attachments
PC_i3-35 Ironrye_Farmhouse 1.ESP
Updated 09/05
(8.98 KiB) Downloaded 3 times

User avatar
Jackimoff Wackimoff
PT Modder
Posts: 13
Joined: Wed Feb 10, 2021 1:00 pm

Post by Jackimoff Wackimoff »

Sorry for the delay, I've had a very busy week. Reviewing

User avatar
Jackimoff Wackimoff
PT Modder
Posts: 13
Joined: Wed Feb 10, 2021 1:00 pm

Post by Jackimoff Wackimoff »

Name:PC_i3-35 Ironrye Farmhouse

Clean: Yes

Lighting: No issues

Northmarker: Present, not rotated. This isn't a problem that would cause it not to pass, but just since it'll make it easier to merge please change the z-rotation to 4.6

Fits exterior: Yes, good

Pathgrid: No issues

Illegal to Sleep Here: Yes, good

Gridsnap:N/A

Bleeders:
T_Imp_Drink_AleAkul_01, into the pot behind it

Floaters:
T_Imp_Furn_RugRoundXp_03, don't forget to lower everything on top of the rug when you drop it.

Rescaled miscs:

Other:

misc_uni_pillow_01 should be sunk slightly into the bed so it looks soft.

Very nice rotations on the table, normally this step takes the longest but you've already done it to satifactory quality. Nice job.

AlexanderSig
PT Modder
Posts: 4
Joined: Fri Apr 29, 2022 6:44 pm

Post by AlexanderSig »

Thanks for the good feedback! All those issues are fixed now
Attachments
PC_i3-35 Ironrye_Farmhouse 1.ESP
(8.98 KiB) Downloaded 2 times

User avatar
Jackimoff Wackimoff
PT Modder
Posts: 13
Joined: Wed Feb 10, 2021 1:00 pm

Post by Jackimoff Wackimoff »

All issues fixed, excellent work. That's a pass!

User avatar
worsas
Project Administrator
Posts: 2575
Joined: Wed Dec 31, 2014 1:23 am

Post by worsas »

Promoted. Welcome and congratulations!

Post Reply

Return to “Modder Showcase”